news center
DSYC Miniature Bearings
2022-08-16
Miniature bearings refer to metric series, with an outer diameter of less than 9mm; inch series, of various types of bearings with an outer diameter of less than 9.525mm. The main materials are carbon steel, bearing steel, stainless steel, plastic, ce…
Reasons and solutions for inflexibility of slewing bearing
2022-07-13
1. The slewing bearing gear is deformed or broken, resulting in stuck or inflexible movement. Corresponding solution: Repair the gear, re-weld the gear.2. There is a problem with the sealing system, it will cause the entry of sundries, such as stones,…
How to determine whether the bearing can be reused？
2022-06-13
During regular maintenance of equipment, operation inspection, and replacement of peripheral parts, judge whether the disassembled bearing can be reused is very important. We should carefully investigate and record the appearance of the bearing. In or…
Tips for success in bearing storage
2022-05-18
1. Ideally, bearings should be stored in a location with low humidity, i.e. less than 60% relative humidity. 2. Bearings should never be stored on the ground, but should be stored on shelves or palettes at least 20 cm above the ground.3.Bearings shoul…
Requirements for bolts of slewing bearings
2022-04-21
1. Full threaded bolts cannot be used2. Do not use old bolts, nuts and washers3. It is forbidden to use open gaskets, such as elastic gaskets.4. The size of the bolts used in the slewing bearing shall comply with the provisions of GB/T5782-2000 and GB…
