news center
How China catches up with foreign bearing giants
2016-10-12
Strengthening bearing research education is urgentThe Japanese bearing giant NSK has 1,800 R&D staff in its headquarters, which is beyond the imagination of Chinese bearing counterparts. In the eyes of many laymen, bearings are components with sim…
Hometown of China bearings-Lingqing
2016-09-28
As the "hometown of bearings" in China, Linqing City has a long history of bearing industry development, which has greatly driven the rapid development of the local economy in Linqing City.In order to promote the development of local bearing…
Causes And Treatment Of Motor Bearings Overheating
2016-08-03
1.The bearing is damaged. Should be replaced.2.Too little or too much grease in rolling bearings or impurities such as iron filings. The capacity of bearing grease should not exceed 70% of the total volume, and those with impurities should be replaced…
How to extend the service life of bearings
2016-07-12
According to statistics, about one-third of the damage to bearings is caused by fatigue loss of components, one-third of the damage is due to poor lubrication during daily use, and the remaining one-third is caused by contaminants entering into the be…
Three Steps on How to Install Tapered Roller Bearings Properly
2016-06-30
Tapered roller bearings are separable bearings. The inner and outer rings are separated. You can press the inner ring retainer assembly on to the shaft. When you press the sleeve, you should place one end of the sleeve on the end face of the outer rin…
