news center
Tips for success in bearing storage
2022-05-18
1. Ideally, bearings should be stored in a location with low humidity, i.e. less than 60% relative humidity. 2. Bearings should never be stored on the ground, but should be stored on shelves or palettes at least 20 cm above the ground.3.Bearings shoul…
Requirements for bolts of slewing bearings
2022-04-21
1. Full threaded bolts cannot be used2. Do not use old bolts, nuts and washers3. It is forbidden to use open gaskets, such as elastic gaskets.4. The size of the bolts used in the slewing bearing shall comply with the provisions of GB/T5782-2000 and GB…
WE ARE BACK TO WORK
2022-02-07
Dear Valuable customers, We, Shandong DSYC Bearing Co.,LTD, are back to work from today.Because some of local transportation companies are not yet back to work, transporations to several cities are still not available.It is estimated tran…
Holiday Break for Chinese New Year
2022-01-28
Dear Valuable customers, We, Shandong DSYC Bearing Co.,LTD, will be closed from Juanary 31, 2022 Until February 7, 2022 for a holiday break of Chinese New Year. We apologize for any inconvenience.Many thanks for your support and we look f…
LYC produces a Slewing Bearing with an 11M OD
2021-11-23
At the end of October 2021, the Chinese bearing manufacturer Luoyang LYC Bearing Co., Ltd. presented its new extra-large bearing, which was developed and manufactured at their own facilities.The slewing bearing with an outer diameter of 11.47 meters h…
